Just finished up the Hub, Nano Slave and External Connector. The Hub will be the interface between the Master Shield and the Slaves. External Connector will be used for easier cabling between the consoles and the Main Instrument Panel. This is the first time i design something involving an AVR MCU, so any feedback is…
Read more
The first Master Shield fully assembled. I’ve put in 3A fuses on purpose to „monitor” my current draw for now. The final circuit and cables are dimensioned for 5A per bus. I also beeped out the circuit to verify all connections which was fine. Next up is applying power. I’ll be using the GPU outputs…
Read more
Xmas came early this year. Got everything needed for the first panel now, except the Arduino Mega shield from JLCPCB which should be here in the next couple days.
Just stumped upon jlcpcb’s assembly service which seems like a veeery good deal as long as you stick to the economic service with only basic components. So why make a board that interfaces with an Arduino nano, when i can put the AVR328P ON the same board? I know nothing and everything comes from YouTube,…
Read more
Connected via I2C. Seems like these have a hardcoded address though, so i will need SPI displays or maybe good old 7-seg? Or one Arduino Nano per display 😂
Welcome to WordPress. This is your first post. Edit or delete it, then start writing!